Connect your Zaptec to Victron
Phaeton runs on your Victron system and adds your Zaptec Go / Go 2 / Pro as a Victron EV charging station. It shows in VRM and charges the car from solar surplus.
- Zaptec Go / Go 2 / ProThrough the manufacturer cloud
- Phaeton on your Victron systemAppears as a Victron EV charging station
- VRM and the Victron display
What you get
- Your charger appears in VRM and on the Victron display with its charging power and status.
- Auto mode follows the solar production and household use your Victron system measures, not only the grid meter.
- Manual, Auto and Scheduled charging from Phaeton's own page on your Victron system.
- Sets the current in steps smaller than 1 A, so the Auto mode Feed-in can follow the power going to the grid in 0.2 A steps.
Why not the charger's own solar mode?
A charger's own solar mode usually reads only the grid meter. With a Victron home battery, the battery takes the surplus first, so the meter shows little export and the charger keeps waiting. Phaeton reads production and use from the Victron system itself.
Before you buy
A Victron system running Venus OS. Installation guide
For the Zaptec Go / Go 2 / Pro:
Requires internet, a Zaptec API service account with owner/service access and the selected charger UUID. The installer must confirm that external per-charger current control is appropriate. Phaeton does not manage shared installation allocation. Use this cloud integration for one charger per API account.
Cloud or internet outages can prevent control, including stopping. Phase switching and energy/session accounting are unavailable through this integration.
Full setup requirementsModel not listed? Ask us before buying
One license per charger
€99 for your first charger, €49 for each extra charger in the same household. Updates included, 30-day refund.